Where are you now:
Homepage
/
/
/
What is CPE (chlorinated polyethylene)

What is CPE (chlorinated polyethylene)

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-13
  • Views:0

(Summary description)Chlorinated polyethylene (CPE) is a saturated polymer material, white powder in appearance, non-toxic and odorless, with excellent weather resistance, ozone resistance, chemical resistance and aging resistance, and good oil resistance, flame retardancy and coloring performance. Good toughness (flexibility at -30°C), good compatibility with other polymer materials, high decomposition temperature, decomposition to produce HCl, HCl can catalyze the dechlorination reaction of CPE.

Chlorinated polyethylene is a polymer material made from high-density polyethylene (HDPE) through chlorination substitution reaction. According to different structures and uses, chlorinated polyethylene can be divided into resin type chlorinated polyethylene (CPE) and elastomer type chlorinated polyethylene (CM). In addition to being used alone, thermoplastic resins can also be blended with resins such as polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS, and even polyurethane (PU). In the rubber industry, CPE can be used as a high-performance, high-quality special rubber, and can also be combined with ethylene propylene rubber (EPR), butyl rubber (IIR), nitrile rubber (NBR), chlorosulfonated polyethylene (CSM), etc. Other rubbers are blended for use.

What is CPE (chlorinated polyethylene)

(Summary description)Chlorinated polyethylene (CPE) is a saturated polymer material, white powder in appearance, non-toxic and odorless, with excellent weather resistance, ozone resistance, chemical resistance and aging resistance, and good oil resistance, flame retardancy and coloring performance. Good toughness (flexibility at -30°C), good compatibility with other polymer materials, high decomposition temperature, decomposition to produce HCl, HCl can catalyze the dechlorination reaction of CPE.

Chlorinated polyethylene is a polymer material made from high-density polyethylene (HDPE) through chlorination substitution reaction. According to different structures and uses, chlorinated polyethylene can be divided into resin type chlorinated polyethylene (CPE) and elastomer type chlorinated polyethylene (CM). In addition to being used alone, thermoplastic resins can also be blended with resins such as polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS, and even polyurethane (PU). In the rubber industry, CPE can be used as a high-performance, high-quality special rubber, and can also be combined with ethylene propylene rubber (EPR), butyl rubber (IIR), nitrile rubber (NBR), chlorosulfonated polyethylene (CSM), etc. Other rubbers are blended for use.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-13
  • Views:0
Information
Chlorinated polyethylene (CPE) is a saturated polymer material, white powder in appearance, non-toxic and odorless, with excellent weather resistance, ozone resistance, chemical resistance and aging resistance, and good oil resistance, flame retardancy and coloring performance. Good toughness (flexibility at -30°C), good compatibility with other polymer materials, high decomposition temperature, decomposition to produce HCl, HCl can catalyze the dechlorination reaction of CPE.
 
Chlorinated polyethylene is a polymer material made from high-density polyethylene (HDPE) through chlorination substitution reaction. According to different structures and uses, chlorinated polyethylene can be divided into resin type chlorinated polyethylene (CPE) and elastomer type chlorinated polyethylene (CM). In addition to being used alone, thermoplastic resins can also be blended with resins such as polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS, and even polyurethane (PU). In the rubber industry, CPE can be used as a high-performance, high-quality special rubber, and can also be combined with ethylene propylene rubber (EPR), butyl rubber (IIR), nitrile rubber (NBR), chlorosulfonated polyethylene (CSM), etc. Other rubbers are blended for use.

Scan the QR code to read on your phone

Related information

What are the characteristics of CPE
What are the characteristics of CPE
Time of issue : 2021-07-13 11:32:00
1. CPE is a kind of saturated rubber, which has excellent heat-resistant oxygen aging, ozone aging, acid and alkali resistance, and chemical resistance. 2. CPE has general oil resistance. Among them, it has excellent resistance to ASTM No. 1 oil and ASTM No. 2 oil, which is equivalent to NBR; and it has excellent resistance to ASTM No. 3 oil, which is better than CR, and is equivalent to CSM. 3. CPE contains chlorine element, has excellent flame retardant performance, and has the characteristics of burning and dripping. It can be combined with antimony flame retardant, chlorinated paraffin, and Al(OH)3 in an appropriate ratio to obtain a flame retardant material with excellent flame retardancy and low cost. 4. CPE is non-toxic, does not contain heavy metals and PAHs, and it fully meets environmental protection requirements. 5. CPE has high filling performance and can be manufactured to meet various performance requirements. The processing performance of CPE is good, and the Mooney viscosity is available in a variety of grades between 50-100.
See more information
1. CPE is a kind of saturated rubber, which has excellent heat-resistant oxygen aging, ozone aging, acid and alkali resistance, and chemical resistance. 2. CPE has general oil resistance. Among them, it has excellent resistance to ASTM No. 1 oil and ASTM No. 2 oil, which is equivalent to NBR; and it has excellent resistance to ASTM No. 3 oil, which is better than CR, and is equivalent to CSM. 3. CPE contains chlorine element, has excellent flame retardant performance, and has the characteristics of burning and dripping. It can be combined with antimony flame retardant, chlorinated paraffin, and Al(OH)3 in an appropriate ratio to obtain a flame retardant material with excellent flame retardancy and low cost. 4. CPE is non-toxic, does not contain heavy metals and PAHs, and it fully meets environmental protection requirements. 5. CPE has high filling performance and can be manufactured to meet various performance requirements. The processing performance of CPE is good, and the Mooney viscosity is available in a variety of grades between 50-100.
Types of PE bags
Types of PE bags
Time of issue : 2021-07-13 11:27:00
According to materials: PE is divided into LDPE, LLDPE and HDPE.    according to the production process is divided into: PE flat bag, ziplock bag, zipper bag, envelope bag, punching handbag, handle handbag, zipper bag, PE film.   1. PE flat bag is the simplest manufacturing process. After the film is blown by the machine, the bag is cut into a bag on the bag making machine, and the bottom is sealed.   2. The ziplock bag is equipped with a bone strip when the film is blown by the machine, which can be sealed manually. Unlike zipper bags, these two types of bags are generally easy to confuse.   3. The zipper bag is a bag made of PE film with 2 clip chains (this clip chain is separately produced). The two sides of the bag generally have relatively wide indentations, while the ziplock bag does not. Ziplock bags have few printing colors, while zipper bags can print complex patterns.   4. The envelope bag has a tongue like an envelope. A strip of glue is attached to the tongue, which can be folded to seal the bag. General clothing is used more. There is also a courier bag which is actually a kind of envelope bag.   5. The punching tote bag is to punch a hole at the top of the flat pocket to facilitate the lifting of the bag.   6. ​​The handle bag is to add a plastic film strip on the top of the bag to facilitate the lifting of the bag. This process consumes labor and is relatively expensive.   7. The zipper bag is to install a zipper strip and a zipper cap on the sealing part of the bag.    8. PE film is the film that is not made into a bag after being blown out by the machine. It is also divided into stretch film and shrink film. Commonly used in the market are counted by one and counted by length (roll). (A) The small bag is mainly used for the packaging of small accessories, electronic products Most of the accessory bags of the products have anti-static effect, and the mouth of the bag is divided into flat mouth and self-sealing structure. The latter is also called bone bag (PE bone bag) or compact bag; (Roll) bags need to be cut by themselves (for material packaging) and printed cuts (for supermarkets). In addition, the cling film made of PE material can also be called a PE bag. Note that the cling film directly in contact with food must be made of PE material (the other is generally PVC), which is safer for the human body. Resolution method: The transparency, stretchability and viscosity of PVC cling film are stronger than PE cling film. When the PVC cling film is burned with fire, the flame will turn black, emit black smoke, have a pungent smell, will not drip oil, and will automatically go out after leaving the fire source. When the PE cling film burns, the flame is yellow, odorless, dripping oil, and can continue to burn after leaving the fire source.
See more information
According to materials: PE is divided into LDPE, LLDPE and HDPE.    according to the production process is divided into: PE flat bag, ziplock bag, zipper bag, envelope bag, punching handbag, handle handbag, zipper bag, PE film.   1. PE flat bag is the simplest manufacturing process. After the film is blown by the machine, the bag is cut into a bag on the bag making machine, and the bottom is sealed.   2. The ziplock bag is equipped with a bone strip when the film is blown by the machine, which can be sealed manually. Unlike zipper bags, these two types of bags are generally easy to confuse.   3. The zipper bag is a bag made of PE film with 2 clip chains (this clip chain is separately produced). The two sides of the bag generally have relatively wide indentations, while the ziplock bag does not. Ziplock bags have few printing colors, while zipper bags can print complex patterns.   4. The envelope bag has a tongue like an envelope. A strip of glue is attached to the tongue, which can be folded to seal the bag. General clothing is used more. There is also a courier bag which is actually a kind of envelope bag.   5. The punching tote bag is to punch a hole at the top of the flat pocket to facilitate the lifting of the bag.   6. ​​The handle bag is to add a plastic film strip on the top of the bag to facilitate the lifting of the bag. This process consumes labor and is relatively expensive.   7. The zipper bag is to install a zipper strip and a zipper cap on the sealing part of the bag.    8. PE film is the film that is not made into a bag after being blown out by the machine. It is also divided into stretch film and shrink film. Commonly used in the market are counted by one and counted by length (roll). (A) The small bag is mainly used for the packaging of small accessories, electronic products Most of the accessory bags of the products have anti-static effect, and the mouth of the bag is divided into flat mouth and self-sealing structure. The latter is also called bone bag (PE bone bag) or compact bag; (Roll) bags need to be cut by themselves (for material packaging) and printed cuts (for supermarkets). In addition, the cling film made of PE material can also be called a PE bag. Note that the cling film directly in contact with food must be made of PE material (the other is generally PVC), which is safer for the human body. Resolution method: The transparency, stretchability and viscosity of PVC cling film are stronger than PE cling film. When the PVC cling film is burned with fire, the flame will turn black, emit black smoke, have a pungent smell, will not drip oil, and will automatically go out after leaving the fire source. When the PE cling film burns, the flame is yellow, odorless, dripping oil, and can continue to burn after leaving the fire source.
Talking about the principle of heat shrinkable film
Talking about the principle of heat shrinkable film
Time of issue : 2021-07-13 11:35:00
Heat shrinkable film is mainly used for labels, heat shrinkable packaging or stretch film. The polymer resins suitable for preparing heat shrinkable film mainly include PVC, PE, PS, PET, etc. After the film is preheated, it is stretched, cooled and shaped (as long as it is not subjected to heat-setting treatment) to obtain a heat shrinkable film. Under the Tf close to the resin, the resin cast sheet is stretched in the transverse and longitudinal directions, and then quenched, so that the resin molecular chains are frozen in an oriented state, forming a heat shrinkable film. It is a process of entropy reduction from the raw material to the production of heat shrinkable film. The thermodynamic state of heat shrinkable film is unstable. When the shrinkable film is heat-treated, the oriented molecular chains will quickly return to random coils (curved state). , The film shrinks. This feature of the heat shrinkable film can be used to prepare labels for special-shaped bottles. From the perspective of functional requirements, heat-shrinkable sleeve labels have the characteristics of moisture-proof, anti-corrosion, impact-resistant, tear-resistant, odorless and non-toxic; they can play a role in anti-counterfeiting; protect consumers from damage or rupture of the container. accidental damage. The most important thing is that this label can be recycled, which has significant advantages in saving costs and protecting the environment. However, there are also many difficulties in the design process of heat shrinkable sleeve labels. When producing heat-shrinkable sleeve labels, the most widely used film material in the market is PVC heat-shrinkable film. This kind of film has many advantages such as waterproof, fire resistance, high transparency, high gloss, high shrinkage rate, etc., but the material is prone to produce toxic gas when burned, which is not conducive to environmental protection. As a new material, OPS heat shrinkable film is a kind of skin packaging material that meets environmental protection requirements. It has many advantages such as high strength, high rigidity, good gloss, high shrinkage, and compliance with food hygiene standards. However, due to the current market There are not many companies that produce this film in Shanghai, and they cannot fully meet the market demand for this film. For the ink, the quality of the ink directly affects the printing effect of the heat shrinkable sleeve label. Practice has proved that UV flexo printing ink is a very good choice, and its biggest advantage is that it can achieve higher color strength through curing and drying, which also brings great challenges to traditional gravure inks.
See more information
Heat shrinkable film is mainly used for labels, heat shrinkable packaging or stretch film. The polymer resins suitable for preparing heat shrinkable film mainly include PVC, PE, PS, PET, etc. After the film is preheated, it is stretched, cooled and shaped (as long as it is not subjected to heat-setting treatment) to obtain a heat shrinkable film. Under the Tf close to the resin, the resin cast sheet is stretched in the transverse and longitudinal directions, and then quenched, so that the resin molecular chains are frozen in an oriented state, forming a heat shrinkable film. It is a process of entropy reduction from the raw material to the production of heat shrinkable film. The thermodynamic state of heat shrinkable film is unstable. When the shrinkable film is heat-treated, the oriented molecular chains will quickly return to random coils (curved state). , The film shrinks. This feature of the heat shrinkable film can be used to prepare labels for special-shaped bottles. From the perspective of functional requirements, heat-shrinkable sleeve labels have the characteristics of moisture-proof, anti-corrosion, impact-resistant, tear-resistant, odorless and non-toxic; they can play a role in anti-counterfeiting; protect consumers from damage or rupture of the container. accidental damage. The most important thing is that this label can be recycled, which has significant advantages in saving costs and protecting the environment. However, there are also many difficulties in the design process of heat shrinkable sleeve labels. When producing heat-shrinkable sleeve labels, the most widely used film material in the market is PVC heat-shrinkable film. This kind of film has many advantages such as waterproof, fire resistance, high transparency, high gloss, high shrinkage rate, etc., but the material is prone to produce toxic gas when burned, which is not conducive to environmental protection. As a new material, OPS heat shrinkable film is a kind of skin packaging material that meets environmental protection requirements. It has many advantages such as high strength, high rigidity, good gloss, high shrinkage, and compliance with food hygiene standards. However, due to the current market There are not many companies that produce this film in Shanghai, and they cannot fully meet the market demand for this film. For the ink, the quality of the ink directly affects the printing effect of the heat shrinkable sleeve label. Practice has proved that UV flexo printing ink is a very good choice, and its biggest advantage is that it can achieve higher color strength through curing and drying, which also brings great challenges to traditional gravure inks.

Contact

 

Tel:86 13360173981(wechat)
E-mail:lf@lifeng-bopp.cn

Address: Xiehe Industrial Park, Laimei Road, Fengxiang street, Chenghai District, Shantou City, Guangdong Province

 

Copyright (c)    Shantou Lifeng Plastic Film Co., Ltd.  All Rights Reserved      粤ICP备2021128481号     Powered by www.300.cn